Bill,
Sounds like a conflict with DTR/RTS/Handshake on the radio port.
Look at the "COMn_RTS_INIT and COMn_DTR_INIT directives in the
[Rigs] section of the writelog.ini file - check the Writelog
help file for syntax. etc.
You may need to experiment with the various settings to force DTR
and RTS on the radio control port to the state that works with
your rig and interface.
73,
... Joe, W4TV
On 8/24/2011 3:54 PM, Ken wrote:
> As I set up WL to use with a Kwd rig and the winkey USB for CW I
> have the following problem. The only way I can get WL to control the
> Kwd is if I click the CWbutton on the com 7 (kenwood radio) line.
> This way, I have no CW, but total radio control. All the other radio
> settings are correct. (8, N, 1, 4800b)
>
> If I set up the winkeyer on com 9, (no radio) and click the cw
> button, then I lose radio control!
>
> My ancient version of WL had three checkable boxes, radio, cw, and
> dvk.-but this new 10.76 ver does not have a clickable radio button.
>
> I have no problem controling the radio (com 7 )and the winkey (com
> 9)with my logging pgm, and other contest pgms, but I'd prefer to
> use WL.
>
> Even if I didn't want WL to send CW (but I do), the only way I can
> get it to control the rig is to click that CW button on the radio
> line.
> I must be doing something wrong.
>
> Any ideas?
>
> WL 10.76, Windows Vista
>
> Bill, K1SM
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|