WriteLog
[Top] [All Lists]

Re: [WriteLog] Puzzling WL Error message.

To: Steve Woodruff <steve@n9oh.com>
Subject: Re: [WriteLog] Puzzling WL Error message.
From: Ron Lodewyck <RLodewyck@csustan.edu>
Reply-to: RLodewyck@csustan.edu
Date: Mon, 16 May 2011 14:33:57 -0700
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Steve,

That solved the problem!  I opened the sound board mixer control and saw 
that I only had selected something for ""xmit from PC".  So I 
arbitrarily selected something for the other three items: "DVK mic", 
"rec to PC", and "Audio Review", and Voila! the annoying error message 
is gone.    Frankly I am uncertain what these selections actually mean.  
Where in the instruction manual would I find an explanation?  Also, I 
was under the impression that the Sound Board Mixer Control was 
irrelevant in Windows 7 and that the Windows mixer controls handled all 
the audio connections and levels.

Anyway, THANKS!
73,
Ron N6EE


On 5/16/2011 2:14 PM, Steve Woodruff wrote:
> Hi Ron,
>
> Have you tried going into the WriteLog sound board mixer control (its 
> a separate program you run from the Start Menu -> Programs -> WriteLog 
> -> sound board mixer control) and verifying that the sound devices 
> listed there are valid and accurate?
>
> Thanks,
>
> Steve N9OH
>
>
> On Mon, May 16, 2011 at 12:32 PM, Ronald Lodewyck 
> <RLodewyck@csustan.edu <mailto:RLodewyck@csustan.edu>> wrote:
>
>     I have been struggling for several months now (since upgrading
>     from Win XP to Win 7) trying to eliminate an annoying WL generated
>     error message every time I open WL.  Attached is a screen capture
>     of the error message.  Perhaps the name of the jpg file might also
>     be a clue as it suggests an error ID number?
>     The error window pops open after I select a log to reopen and
>     before any of the WL windows (like Entry, Log, Band Summary, etc.)
>     open.  When I close the error window, WL opens and seems to work
>     just fine.  While this error message does not appear to imply a
>     loss of functionality, it is annoying and I'd really like to get
>     rid of it.
>     I have already read and implemented all the suggestions for
>     installing WL under Win 7 as well as ensuring I have a
>     WaveFileLocation parameter set to the correct path on my data hard
>     drive.  I am using the current version of WL 10.85K), but the
>     message has persisted through several version upgrades.  I have
>     also ensured that I have all the latest Win 7 upgrades.
>      I have already tried (twice - once in January and once last week)
>     posting to the WL Reflector, and received several suggestions, but
>     nothing has helped.  Your assistance would be greatly appreciated.
>     Thanks and 73,
>     Ron N6EE
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>