WriteLog
[Top] [All Lists]

Re: [WriteLog] Problem with Macros in v10.83

To: "'K3RWN'" <rwnewbould@comcast.net>, <writelog@contesting.com>
Subject: Re: [WriteLog] Problem with Macros in v10.83
From: "Gene W5DQ" <w5dq@mchsi.com>
Date: Sat, 29 Jan 2011 21:46:47 -0800
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
No, I have it set to LSB. If I set it to FSK, rig doesn't TX as I don't use
PTT via Radio COMM port (KENWOOD TS940S on COM 1). I use a second com port
(COM 3) with PTT on RTS and CW keying via DTR. I also have 'LSB is same as
FSK' check. I don't have any input into the FSK port on the TS940 so if I
select FSK, rig is deaf.

Gene W5DQ

-----Original Message-----
From: K3RWN [mailto:rwnewbould@comcast.net] 
Sent: Saturday, January 29, 2011 9:02 PM
To: 'Gene W5DQ'
Subject: RE: [WriteLog] Problem with Macros in v10.83

In the WL QSO entry window do you have the mode set to FSK?  i.e. 14080 FSK

Rich


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>