[WriteLog] CW Decoder setup: K3, WL and MicroKeyer2?

[Eric Rosenberg <ericrosenberg.dc@gmail.com>]

Joe --

Thanks for the explanation.
Here's the existing setup:

The MicroHAM USB Device Router 7.7.1's AUDIO MIXER is now set this way:
    MicroHAM CODEC (options are None and Intel(r) Integrated Audio (the
computer's built-in soundcard)
    Stereo box in NOT checked

WriteLog v10.82a
 SETUP|CW Decoder:  Mono (1 Radio) is checked

I'm not sure how and what I re-configure.

73,
Eric W3DQ
Washington, DC




[WriteLog] CW Decoder setup: K3, WL and MicroKeyer2? *Joe Subich, W4TV* lists
at subich.com
<writelog%40contesting.com?Subject=%5BWriteLog%5D%20CW%20Decoder%20setup%3A%20K3%2C%20WL%20and%20MicroKeyer2%3F&In-Reply-To=4CF45726.50907%40gmail.com>
*Mon Nov 29 18:45:21 PST 2010*

   - Previous message: [WriteLog] CW Decoder setup: K3, WL and MicroKeyer2?
   <http://lists.contesting.com/pipermail/writelog/2010-November/032013.html>
   - *Messages sorted by:* [ date
]<http://lists.contesting.com/pipermail/writelog/2010-November/date.html#32014>
[
   thread 
]<http://lists.contesting.com/pipermail/writelog/2010-November/thread.html#32014>
[
   subject 
]<http://lists.contesting.com/pipermail/writelog/2010-November/subject.html#32014>
[
   author 
]<http://lists.contesting.com/pipermail/writelog/2010-November/author.html#32014>

------------------------------

>* Stereo does work, as audio is being fed by the radio to the "other"
*>* channel (which you can see), which you cannot hide (both displays
* > go away).
>*
*>* My conclusion is that the R + L connections on the plug that goes
*>* into the radio from the MK2 DB-37 need to be swapped. My shaking
*>* hands and semi-mediocre eyesight make me a bit more nervous about
*>* this than I'd prefer!
*
No, the problem is in WriteLog.  If you are using the default sound

card, the Stereo/Mono switching operates correctly.  If microHAM
CODEC is not the default sound card (the preferred configuration for
other modes) selecting "mono" will cause WriteLog to select the
wrong (default) soundcard no matter which soundcard has been selected

for "rec to PC" in the WriteLog Mixer Control.

I forwarded your original posting to Wayne along with some test data.
Wayne postulated the error and I was able to verify it on one of my
test systems by feeding audio to a second (default) sound card in

parallel with microHAM CODEC.

While I have no specific knowledge of future releases, I am confident
that Wayne will fix the bug in the next version of Writelog.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.

        http://www.microHAM-USA.com <http://www.microham-usa.com/>
        http://groups.yahoo.com/group/microHAM
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/