For op systems after Windows 98, Writelog needs a third party driver to
open LPT1. Direct I/O is the one most of us use, but it costs about
$30. There is also a free one out there somewhere on the internet...
For other reasons, I eventually switched to keying with COM 1 - which
can be used to control a rig and produce CW at the same time, and also
only requires a single transistor level shifter....
73
Hal
N4GG
---------------------------------
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Phillips, Richard
Sent: Wednesday, June 16, 2010 10:09 AM
To: writelog@contesting.com
Subject: [WriteLog] CW keying
I have used a parallel port for CW keying with Log-EQF using a home brew
cable with built in transistor switch.
How can I use the same set-up with Writelog?
The parallel port button in the Ports menu for CW is grayed out.
73, Rich AA9L
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|