The new update for microHAM Router - version 7.6.0 is now
available via the "update Router" link within Router, from
www.microHAM-USA.com/downloads.html or www.microHAM.com.
Significant changes include:
FTDI USB driver updated to CDM v. 2.6.0 for Windows 7/64.
Support for SteppIR SDA-100 controller (MK2R/MK2R+, MK II)
Support for Ultrabeam antennas (MK2R/MK2R+, MK II)
Software fix for the Yaesu "M-Tune" problem
Recovery for TenTec Omni VII timeout when the front panel
"shift" button is pressed
A fix for the undocumented "read status flag" response in
some FT-920 transceivers.
Added independent tail timers for PA PTT and LNA PTT
(MK2R/MK2R+ and microKEYER II only)
Improved ability of K3 (patched) driver to deal with
missing or delayed responses
All manuals have been updated and now include separate
audio level set-up instructions for those using Vista
and Windows 7.
There is no compelling reason for users of USB interface II,
USB Interface III, CW Keyer, DigiKeyer and microKEYER to
upgrade from Router 7.2.4 or 7.4.0 unless you have having
problems with Windows 7 or are using an Omni VII or Yaesu
transceiver. Users of microKEYER II and MK2R/MK2R+ will
find additional functionality in some of the auxiliary
control options.
Note: Router 7.6.0 contains an interface for linking an
auxiliary receiver to the transceiver (e.g., "tracking").
Tracking is INCOMPLETE - there is NO SUPPORT for the
feature and there will be no response to questions about
its use or future development.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|