If I recall, this has to do with the fact that you can only work
stations once in SS so QSO's or Mults on a per band basis don't matter.
Bruce W1CSM
Message: 1
Date: Mon, 9 Nov 2009 11:03:33 -0500
From: "K2MK" <k2mk@comcast.net>
Subject: [WriteLog] Sweepstakes packet spots window
To: "WriteLog Reflector" <WriteLog@CONTESTING.COM>
Message-ID: <0B48299FDCB1468A837185D81297BEF5@Dell2008>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
I have only encountered this problem with Sweepstakes. The packet spots
window offers two options. All Bands or Follow Me. I chose Follow Me but
it
continued to show me spots for all bands. There was no difference
between
All Bands and Follow Me. My frequency and mode were always correct on
the
WriteLog display. Hitting a spot worked correctly taking me to the
posted
frequency and changing bands if required. I prefer Follow Me when
running my
amplifier. It helps me avoid cockpit error.
I do not have this problem with other contest modules that I have used.
Follow Me always displays only those spots for the band that my rig is
currently tuned to.
Do I have a defective plug-in? Am I missing a file?
73,
Mike K2MK
------------------------------
Message: 2
Date: Mon, 9 Nov 2009 08:10:33 -0800
From: "Bob Moore" <ki6iv@sbcglobal.net>
Subject: Re: [WriteLog] Sweepstakes packet spots window
To: "'K2MK'" <k2mk@comcast.net>, "'WriteLog Reflector'"
<WriteLog@CONTESTING.COM>
Message-ID: <3EAC861A8365421EA1FB3DE218E940ED@LoisPC>
Content-Type: text/plain; charset="us-ascii"
Glad you brought this up, I have exactly the same problem, hopefully
someone
will post a fix for us..........Bob, K6NV
Bob Moore
SNOWFIRE Consulting
10057 Wycliffe Ln.
Truckee, CA 96161
(530)575-5766
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of K2MK
Sent: Monday, November 09, 2009 8:04 AM
To: WriteLog Reflector
Subject: [WriteLog] Sweepstakes packet spots window
I have only encountered this problem with Sweepstakes. The packet spots
window offers two options. All Bands or Follow Me. I chose Follow Me but
it
continued to show me spots for all bands. There was no difference
between
All Bands and Follow Me. My frequency and mode were always correct on
the
WriteLog display. Hitting a spot worked correctly taking me to the
posted
frequency and changing bands if required. I prefer Follow Me when
running my
amplifier. It helps me avoid cockpit error.
I do not have this problem with other contest modules that I have used.
Follow Me always displays only those spots for the band that my rig is
currently tuned to.
Do I have a defective plug-in? Am I missing a file?
73,
Mike K2MK
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
End of WriteLog Digest, Vol 83, Issue 8
***************************************
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|