The solution came from Jim, NU4Y offered " tools, sound board options, echo
mike. checked." this did the trick.
Thanks!
Jim/KC4HW
On 27 Sep 2009 at 14:13, KC4HW wrote:
> Using MK2R+ and Writelog. Have been working through some set up
> issue with
> MK2R+ but believe those are all squared away.
>
> Use FT2000D on Radio1 and FT1000D on Radio2. My version of Writelog
> is
> 10.69D (Got to upgrade).
>
> All SO2R functions seems to work properly on CW. I have not tried
> RTTY, that
> will be next.
>
> One problem remains: The TX Mixer in MK2R+ Router, Microphone panel
> continues to get muted when changing from one radio to another in
> Writelog. If
> I unmuted it, then that radio will transmit. Change focus to the
> other radio and it
> will be muted again. Unmute it, and the radio will work properly.
>
> How do you keep this from muting? I have looked through the Help
> Manual and
> the reflector archive, but could not find any solution.
>
> Anyone got help on this?
>
> Jim/KC4HW
>
> Jim/KC4HW
> http://www.AlabamaContestGroup.org
> http://www.AlabamaQSOParty.org
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
Jim/KC4HW
http://www.AlabamaContestGroup.org
http://www.AlabamaQSOParty.org
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|