Dave, almost every com port device, whether motherboard, add-on card or USB has
a feature to assign it to whatever port you wish.
Usually it's in Control Panel>System Prop>Hardware>Device Manager>Ports
Almost always if you select the port device, and to to Port Settings>Advanced,
there is a means to select a different number.
Remember most BIOS reserve com 1 and 2 for mother board devices, but if there
are none, they can be used....usually
If not, they must be reassigned in the bios setup.
On 4/28/2009 10:44:55 AM, Dave Earnest (k7jj@arrl.net) wrote:
> Hi,
>
>
>
> I successfully installed my Vscomm PCI-200L dual serial comport card
> installed in a new HP machine. Only problem is, Device Manager assigned
> ports 11 and 12. Ports 1,2,3,4,5 are not in use.
>
>
>
> My problem is: Rttyrite only recognizes ports 1 through 8.
>
>
>
> I can manipulate Writelog using CommSlotx=y to use 11 and 12.
>
>
>
> Is there a way to change ports on rttyrite?
>
>
>
> 73,
>
>
>
> Dave, K7JJ
>
>
>
>
>
> Dave Earnest
>
> k7jj@arrl.net
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|