WriteLog
[Top] [All Lists]

Re: [WriteLog] Two sound cards and MMTTY

To: "Dave Hachadorian" <K6LL@ARRL.net>, "Nicholas Roy Smith" <nicksmith@citlink.net>, <writelog@contesting.com>
Subject: Re: [WriteLog] Two sound cards and MMTTY
From: Jerry Pixton <jpixton@shentel.net>
Date: Wed, 04 Feb 2009 13:38:27 +0000
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Nick,

The only addition I would make is, I always get in the habit of opening the 
rttyrite window for "radio right" first so that it contains the audio from 
the radio on the right. Writelog will always open the first window from the 
configuration in [rttyrite] and the second window from [rttyrite2] so you 
want to make sure your cursor is in the proper entry window to get it all 
matched up. Things get confusing when you change one to the rttyrite 
windows to cw or psk and then go back to open an rtty window. Often you 
will get the wrong one and I have to close both windows and reopen them in 
the proper order. In my case, my primary radio is on the right and Writelog 
knows it as the second entry window.

Jerry, W6IHG


At 05:38 AM 2/4/2009 +0000, Dave Hachadorian wrote:
>Hi Nick,
>
>Why TWO sound cards? For so2r, just one card, with left
>radio on the left channel and right radio on the right
>channel, is all that is needed, unless you are running
>Win98. However, the latest version of mmtty lets you select
>which sound card you want to use, so I guess you could
>select a different card for the left and right side.
>
>As far as telling the left side to use one directory and the
>right side the other, I would suggest renaming the two mmtty
>directories. Then start writelog and set up one side at a
>time. When you try to start mmtty on the left side, you will
>get a message like "can't find the mmtty directory" (because
>you renamed it). Then a little window pops up where you can
>browse to the proper directory.
>
>After you get the left side set up, then you can set up the
>right side in a similar manner. After all is set up, save
>config and you should be good to go right out of the box
>next time you start writelog.
>
>73
>
>Dave Hachadorian, K6LL
>Yuma, AZ
>
>
>----- Original Message -----
>From: "Nicholas Roy Smith" <nicksmith@citlink.net>
>To: <writelog@contesting.com>
>Sent: Wednesday, February 04, 2009 3:05 AM
>Subject: [WriteLog] Two sound cards and MMTTY
>
>
> >I can get it to work on the left radio and right radio but
> >it takes about 20 to 30 minutes of trying to find out which
> >one is which.  However when I save everything and start
> >writelog again I have to spend that much time getting it
> >setup every time.  Writelog won't save what I have setup.
> >I used save configuration but won't.
> >
> > I saved MMTTY in two directories and try that method but
> > don't know how to tell the left to operate from one
> > directory and the right to operate from the other
> > directory.
> >
> > It seems that the selection of 1 and 0 change from start
> > up to start up.  I am totally confused as how to cure
> > this.
> >
> > Anyone know what to do?
> > Nick Smith
> > W4GKM
> > www.aero-smith.net
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
------------------------------------------


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>