WriteLog
[Top] [All Lists]

[WriteLog] Problem: "Packet Spots" Window for CQWW 160 CW (Writelog v10.

To: <writelog@contesting.com>
Subject: [WriteLog] Problem: "Packet Spots" Window for CQWW 160 CW (Writelog v10.69D)
From: "Jeff Maass" <jmaass@k8nd.com>
Reply-to: jmaass@k8nd.com
Date: Tue, 30 Dec 2008 20:46:09 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
I am testing the current version of Writelog for use 
in the upcoming CQWW 160 CW Contest, and have an 
unexplained problem. 

The radio assigned is my K3, and the program is correctly 
displaying and follows the frequency on the radio. The 
bandmap shows the correct band, and shows incoming packet 
spots correctly. 

However, in the "Packet Spots" Window, selecting "Follow 
Me" does not limit spots displayed to those on 160 meters
(i.e. there are spots for 20, 40, and 80 meters shown as
well as those on 160). This makes it difficult to pluck
useful spots from useless ones for this single-band contest!

The options for the "Packet Spots" window are "All Bands" 
and "Follow Me". Selecting either makes no difference.

Any ideas why this does not work?  Can someone configure 
for the same contest and see if the behavior is the same?


73,  Jeff  K8ND
 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>