To get cut numbers for just the Zero and the 9 this worked for me:
[Cut-Numbers]
0=T
9=N
Is there any way to get cut numbers only on leading zeros?
73 Art W2NRA
"Keep to the Code!"
w2nra.com
----- Original Message -----
From: "Hal Kennedy" <halken@comcast.net>
> Several comments:
> First, cut numbers only work in conjunction with the % key in the F
> messages. So, if you have %3 in F3 and press F3 and it is going to send
> serial number ONE, it will sent T-T-1.
> Second, there is no reason to define 1 through 8 as themselves. You can
> delete those lines.
> Third, defining 9 and N is a bad idea, as in certain combinations of
> serial numbers you really want to send the nine. For signal reports,
> put 5NN into the F key message and get your signal report handled that
> way.
>
> My .ini file looks like this:
>
> [Cut-Numbers]
> 0=t
>
>
>
> That's it -
> 73
> Hal
> N4GG
>
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of John Muzyka
> Sent: Sunday, March 16, 2008 3:04 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Cut Numbers
>
> Can some one just help me out with this, I cant find it in the archives
> and I know it will be how its set up in the 1st line, but my cut numbers
> dont work, take a look at them below taken from my .ini file
>
> [Cut-Numbers]
> 0=t
> 1=1
> 2=2
> 3=3
> 4=4
> 5=5
> 6=6
> 7=7
> 8=8
> 9=N
>
> What is wrong??
> Cheers
> John G4RCG
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|