Used Writelog for the first time from home QTH and got it mostly working the
way I like. However there are a couple of things I could not get to work.
First one is the rotor control. Looking through the archives I did not find
the answer so will try this group.
Rotor is Yaesu G2800SDX with GS232 card on COM1
In the Setup Ports I have the Left (one rig) set for COM1 & Yaesu.
In the INI I have included the Com1:=9600,n,8,1 right after the rotor stuff.
The Antenna to Azimuth is NOT grayed out.
I have a call in the call field, I click Antenna to Azimuth xxx and nothing
happens.
So what am I missing here in the set-up?
Since I didn't get that working I have not even messed with keyboard
shortcut for the rotor yet to see what problems I have there.
Bill
AC0W
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|