Hank,
Select any of the DVK options (including Windows Sound Board)
and then select DVK on an LPT. Then you will have both A/B
and PTT available on the LPT - even with K1EL WinKey selected
as the CW output.
See the WriteLog help file Under "LPT Port pin Assignments"
The PTT and A/B outputs appear on the LPT port selected for
DVK. The CW output has a separately selectable LPT port,
which can be the same as the DVK setting, or can be different.
Of course with Windows 2000 or Windows XP you will need to install
one of the supported LPT drivers.
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of hank k8dd
> Sent: Monday, November 20, 2006 8:33 PM
> To: writelog@contesting.com
> Subject: [WriteLog] SO2R enhancement
>
>
> I'm working on SO2R ..... With a WinKeyer.
>
> It appears that LPT pin 14 (A/B radio) is not active when you
> setup CW as
> K1EL WinKey on a COM port, but it is when you setup CW as PC
> generates.
> Although the CW Speed windows down on the status line change
> when you select
> either the L or R radio!
> I realize that I can get PTT out of the K1EL WinKey, so that is not a
> problem with LPT pin 16, but it would be nice to be able to
> switch the SO2R
> box when I'm using the K1EL WinKey since it doesn't look like
> pin 14 is used
> for anything else.
>
> Any chance Pin 14 could work when the K1EL WinKey is selected
> on an upcoming
> version?
>
> 73 Hank K8DD
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|