Thanks Dave.
Yes, did all that, still doesn't work. I really think the WL
crew should be making life easier for users.
73
Clive
GW3NJW
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of David
Hachadorian
Sent: 11 November 2006 18:59
To: writelog@contesting.com
Subject: Re: [WriteLog] LPT Ports and directio
----- Original Message -----
From: "Clive Whelan" <clive.whelan@btinternet.com>
To: <writelog@contesting.com>
Sent: Saturday, November 11, 2006 6:52 PM
Subject: [WriteLog] LPT Ports and directio
> Even after a successful installation of directio, all the
> LPT port check boxes are still greyed out in the WL
> configuration dialogue. What might be wrong?
Try K2QMF's procedure:
1 - Open the Direct I/O control panel.
2 - In the I/O Ports Tab enter the BEGIN and END address.
For LPT1 it is 378 and 37A.
3 - Click ADD button ( This is the step they left out)..
4 - Go to the SECURITY Tab
5 - Click BROWSE button and locate writelog directory.
6 - From there locate writelog\Programs\WriteL32.exe and
click OPEN
7 - Click ADD.
8 - Close Control Panel...
Dave Hachadorian, K6LLYuma, AZ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|