WriteLog
[Top] [All Lists]

Re: [WriteLog] LPT port access

To: "Clive Whelan" <clive.whelan@btinternet.com>,<writelog@contesting.com>
Subject: Re: [WriteLog] LPT port access
From: Jerry Pixton <jpixton@shentel.net>
Date: Sun, 08 Oct 2006 12:59:59 +0000
List-post: <mailto:writelog@contesting.com>
Clive,

If you are following the Direct I/O instructions in their Q600003 article, 
there is a vital step missing. After setting the Parallel Port addresses in 
step 2, you must click on the ADD button and then you can go on to step 3 
on the Security tab. See the Writelog archieves for all the times we have 
omitted this step!

Once you get it set up it works like a charm.

73,

Jerry, W6IHG



At 09:50 AM 10/8/2006 +0000, Clive Whelan wrote:
>I need to use pin14 of an LPT port for control of an
>external A/B switch
>
>
>I have downloaded userport and configured as per the
>writelog help file, but still all LPT ports are greyed out
>in the configure dialog. I therefore downloaded directio (
>trial version) with equal lack of success. I am configuring
>LPT1 for Hex 378-37B. I get the feeling I am missing some
>vital step, but can't think what that might be.
>
>
>Advice appreciated.
>
>
>73
>
>
>Clive
>GW3NJW
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>