How about MicroHAM adds another virtual com port and decode and utilize
"TXD" for an FSK output?
Why shift all the blame to Writelog? Why doesn't MicroHAM take some
take some responsibility?
73
Jim W7RY
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Joe Subich, W4TV
Sent: Sunday, July 16, 2006 9:51 AM
To: 'Ed'; writelog@contesting.com
Subject: Re: [WriteLog] RTTY INTERFACE
Ed,
As I responded to Froggy on the microHAM support e-mail:
> Writelog and the MMTTY plug-in do not support EXTFSK. The MMTTY
> plug-in does not read the "active" port from MMTTY.INI - instead
> it takes the port selection from Writelog (notice that the MMTTY
> set-up TX tab has no "PTT Port" selection). Writelog does not
> provide an EXTFSK option on the RTTYrite "Ports" menu.
>
> Writelog's internal "Software FSK" is limited to the TxD line
> (which USB Interface II uses for CAT) and the MMTTY plug-in
> cannot independently select EXTFSK, USB II does not support FSK
> with Writelog (it does with MMTTY alone or MMTTY when used with
> other software including Logger32, DX4Win, DXLab Suite/WinWarbler,
> and N1MM Logger).
This not a "fault" of any software or hardware ... simply a lack
of a common interface.
The potential solutions are:
1) the ability of Writelog to use DTR for "software FSK"
2) adding the capability to map TxD to DTR in microHAM Router
to support the Writelog Software FSK
3) modifying the (third party) MMTTY plug-in for Writelog to
allow specifying the output (PTT) port directly in the
plug-in (using MMTTY.INI)
4) Adding EXTFSK as a choice in the RTTYrite "Ports" list so
EXTFSK can be passed to the plug-in.
In the meantime, USB Interface II will work with WriteLog and
the MMTTY plugin if MMTTY is configured for AFSK (Sound + COM-TxD).
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Ed
> Sent: Sunday, July 16, 2006 11:11 AM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] RTTY INTERFACE
>
>
> K8fu@aol.com wrote:
> > I'm seeking recommendations for an interface unit that will
> work with
> > WriteLog for MMTTY in FSK.
>
> > My first choice was the MicroHAM USB ll............... but
> it will not support WriteLog.
> ----------------
> Well, I bought the Microham USB II about a month ago, and it does OK
> on everything with Writelog except RTTY. Rig will key, and MMTTY shows
> messages but absolutely no shift on the carrier. All other modes work
> OK.
>
> Friend and I have spent about 10 hours trying to fix it with no go.
> Also downloaded the EXTFSK file and installed it, but no help. Virtual
> ports set up by the software work fine.
>
> Just about ready to junk the thing. Went back to my homebrew interface
> for the NAQP, and it worked fine.
>
> Oh, rig is an OMNI VIB+, WL 10.54, and tower computer.
>
> Would be interested in something that WORKS!
>
> 73
> Ed
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|