Tom:
The discrete speed step settings available are set in the
"Setup -> Ports -> CW Speeds" pop-up. Do the CW speeds
seem normal there?
73, Jeff K8ND
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Tom Fitzpatrick
> Sent: Thursday, July 06, 2006 1:17 PM
> To: writelog@contesting.com
> Subject: [WriteLog] W5XD Keyer
>
> There were some recent posts about using the W5XD keyer with
> the newest version of WL.
> I have an old version and all of a sudden the keyer has
> gone crazy. It defaults at about 25WPM. The keying is
> perfect, but the speed control does little. It bottoms out
> at about 25WPM then goes up from there. I've tried
> disconnecting it from the computer, but it hasn't changed.
> I'm a pretty fair CW operator, but I'd like to be able
> to slow it down some.
> Tom, K4IE
> _______________________________________________
> WriteLog mailing list3
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|