----- Original Message -----
From: "Jim Johnson" <jimjohnson@allvantage.com>
To: <writelog@contesting.com>
Sent: Sunday, April 09, 2006 4:30 PM
Subject: [WriteLog] Window XP and LPT CW
> Need a little help with the configuration...
>
> Writelog Version 10.57H
>
> Have Direct-IO version 4.4.271
> Using this example contained in I have identified and
> include ports
> 378, 278 and 3BC
>
> I found the WriteLog.ini in the WINDOWS directory but
> could not
> see where to put the setup for LPTs
>
> LPT ports in WL.ini: LPT1=0x378, LPT2=0x0, LPT3=0x0
>
> In WriteLog Setup Port the areas for selecting the LPT for
> CW
> keeying is grayed out....
Try this method from k2qmf. It worked for me.
Dave Hachadorian, K6LL
Yuma, AZ
--------------------------------
Hello All,
I have spent many hours trying to get Direct I/O
to work on my new computer so that I could send CW
via my LPT port.
The computer uses Windows XP.
Well I finally figured it out!! I'm sure most already have
gotten it to work but I'm not very computer literate.
Anyway here is the way to do it:
1 - Open the Direct I/O control panel.
2 - In the I/O Ports Tab enter the BEGIN and END address.
For LPT1 it is 378 and 37A.
3 - Click ADD button ( This is the step they left out)..
4 - Go to the SECURITY Tab
5 - Click BROWSE button and locate writelog directory.
6 - From there locate writelog\Programs\WriteL32.exe and
click OPEN
7 - Click ADD.
8 - Close Control Panel...
That's it!! It works great.... Good Luck.
73, Ted K2QMF
P.S. - Remember you must do step 3 or forgetaboutit...
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|