This is the website page Bob it gives the details of how the Ports should be
set, 73 Pete G3KNU
----- Original Message -----
From: "Dave NØRQ" <n0rq-lists@sbcglobal.net>
To: "peter jackson" <peter.jackson17@ntlworld.com>
Sent: 06 February 2006 19:08
Subject: Re: [WriteLog] Always on Transmit
> Pete, I had this problem, or a very similar problem, with my Icom
(746PRO),
> a Rigblaster, and WriteLog. With the help of a few guys here, I got it
> working --
> the details are written up at www.qsl.net/n0rq/writelog.htm -- the site
> is down
> at the moment, but I'd guess it should be back up soon....
>
> - Dave N0RQ
>
>
>
>
> ----- Original Message -----
> From: "peter jackson" <peter.jackson17@ntlworld.com>
> To: "wl" <writelog@contesting.com>
> Sent: Monday, February 06, 2006 11:17
> Subject: [WriteLog] Always on Transmit
>
>
> > Hi, When ever I run WL now the tx goes onto transmit, It was working
fine
> > until I tried setting it up for cw working now when I run it it puts the
> > TX
> > on. I think I have had this happen before but darn if I can remember how
I
> > got out of it. Rig control is working fine (756pro111) have set the comm
> > PTT
> > to ON but have tried it OFF, ticked All mode PTT on cw port RTS, also
> > tried
> > it off. When I close WL down it still leaves the comm port setting the
rig
> > to transmit.
> > Must have it up and running for RTTY contest at the weekend. Like to
sort
> > by
> > tonight because I wont be able to sleep worrying about it HI. The old
grey
> > cells aren't what they used to be. Hope someone can help, thanks in
> > anticipation.
> > 73 Pete G3KNU
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|