Stan,
I have been using VE7CC's AR Cluster software and no problem with
writelog. I open the AR software, connect to N7US or any other
cluster and then open writelog. When Writelog opens In the packet
terminal window I select file|telnet and then the ip address of
127.0.0.1 with port 7300. (Sometimes the telnet address window opens
up under the writelog window so you have to minimize writelog first to
see if it is there.)
Dick W7ZR
On Mon, 17 Jan 2005 15:21:26 -0500, Stan Staten <stan.staten@verizon.net> wrote:
> Since I had to give up my TNC to go to COM Port CW keying, I have been
> using telnet to access spots. However, my primary cluster often
> disconnects unexpectedly. From others having similar proglems and
> their discussion in the DX4WIN reflector I installed VE7CC AR Cluster
> and it works fine with DX4WIN. What was not so clear after trying some
> obvious things I have not been able to make a go of it with WL. Curious
> how others are doing it.
>
> Thanks & 73
> Stan, N3HS
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
Tnx es 73
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|