If I am on 250 Hz, it resets to 500 Hz. Maybe
you are already on 500 Hz. I noticed the RIT
thing to, and turned the knob and nothing happened.
Yes, I have trained myself to hit the 250 Hz
button after a spot. Next job is to turn off the
button beeper so I don't get a beep everytime I
do this.
Rick N6RK
> -----Original Message-----
> From: Charles Morrison [mailto:cfmorris@bellsouth.net]
> Sent: Monday, November 29, 2004 7:22 AM
> To: writelog@contesting.com
> Cc: richard@karlquist.com; george.skoubis@verizon.net
> Subject: Filter Reset by Clicking Spot - 1000D
>
>
> I haven't noticed losing the filter settings on the 1000-D, however, I did
> notice that if you've got a TX or RX Clarifier (RIT/XIT) set to on, and
> click on a spot, it disables it.
>
> I use FSK on a 1000D, and always go through the bands and turn on
> all RIT's
> and reset them to 0.00, and then have them ready. If you click
> on a spot in
> the bandmap, the RIT is turned off, and you find yourself turning the
> clarifier knob and it not doing anything. After noticing this, I just
> always make a note to turn it back on if you ever click on
> something in the
> bandmap. Never thought to ask anyone about this until now.
>
> Charlie
> KI5XP
>
>
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com]On Behalf Of George Skoubis
> > Sent: Sunday, November 28, 2004 8:15 PM
> > To: writelog@contesting.com
> > Subject: RE: [WriteLog] Filter Reset by Clicking Spot
> >
> >
> > Hi,
> >
> > We had this discussion a few months ago (it may have been on the
> > TenTec or Orion reflectors). The Orion allows you to set the "default"
> > DSP bandwidth in each mode.
> >
> > A. Set your DSP bandwidth to the width you prefer using the BW knob.
> >
> > B. Press the mode button.
> >
> > C. Choose a different mode.
> >
> > D. Press the mode button and return to the original mode.
> >
> > The bandwidth you set is now the default bandwidth.
> >
> > Do this for each mode and change as often as you wish... I used
> > Writelog and an Orion this weekend and operated Assisted so I know it
> > works FB...
> >
> > 73,
> >
> > George / KF9YR
> >
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|