WriteLog
[Top] [All Lists]

[WriteLog] ASAP Help Needed With Audio Muting Problem

To: writelog@contesting.com
Subject: [WriteLog] ASAP Help Needed With Audio Muting Problem
From: Eric Hilding <dx35@hilding.com>
Date: Sat, 20 Nov 2004 00:10:28 -0800
List-post: <mailto:writelog@contesting.com>
Just when you think it's all gonna work.

RE:
===
Two radios with one sound board
If you use the Radio menu with two entry windows and tell it you have a Radio Left and a Radio Right, then when you "Activate this Radio" (CTRL+R), the sound board mutes the appropriate output channel. You can have two radios with one sound board this way. If you have not told WriteLog whether you are left or right, it puts all audio on both channels. Note that this muting is in effect whether you are transmitting a WAV file or not, so your microphone signal is also routed to the correct rig.
===


Problem:
======
1. I have ONE external Audio Card which gets audio into the TXRX via the computer speaker/line output. This works fine.


2. I have a special "Black Box" which was built with relays to switch this ONE audio source between two TXRX's.

3. When I configured WL for 2 Radios, the audio gets routed AOK as-long-as I am ONLY in the Radio 1 (Left) window.

4. When I change to Radio 2 (Right), no audio comes out of the computer, which sends me down the tubes.

5. I'm not using CTRL + R but rather up/down arrow keys to switch from #1 (Left) to #2 (Right).

How can I keep the audio coming out of the computer THE SAME, regardless of which Radio is selected?

I'm baffled.

Tnx very much.

73...

Rick, K6VVA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>