First - thanks to all who replied to my earlier post. I tried the solutions
proposed that I hadn't tried before. Still no luck. I came across a PCI card
with 2 comm ports and one lpt port at Comp USA. I installed that and same
result.
The two COMM ports show up in device manager as COMM 3 and COMM 6 and show as
operating properly. COMM 1 will power either radio with no problem. WL is
seiing COMM 3 and 6 as when I select them no port not available message. But
they dont seem to communicate with radios.
BTW: COMM 3 and 6 do work with a serial mouse.
There is one thing I do notice that I think may be the problem. The new device
show up as using IRQ 16. Two other devices are also on IRQ 16 -USB controller
and graphics controller. I dont know if that is the problem. However I cant
find any way to change the IRQ of new card. Device manager is not giving me
the option of changing it.
Is this an IRQ problem and if so is there a fix?
Thanks
Alan/N3AD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|