WriteLog
[Top] [All Lists]

Fwd: Re: [WriteLog] Install redux

To: writelog@contesting.com
Subject: Fwd: Re: [WriteLog] Install redux
From: "Alfred J. Frugoli (KE1FO)" <frugoli@worldlinkisp.com>
Date: Thu, 19 Aug 2004 20:28:06 -0400
List-post: <mailto:writelog@contesting.com>

----- Original Message -----
From: Alfred J. Frugoli (KE1FO)
Sent: 8/19/2004 8:26:08 PM
To: natan@twcny.rr.com
Subject: Re: [WriteLog] Install redux

> I can't offer any help on 1 (I have an e-machines 2.4ghz machine that runs 
> Writelog fine).  Regarding #2 just make sure you keep the multikeyer on the 
> real serial port.  I have the multikeyer running on com 1 (the real com port) 
> and two iogear usb/serial converters, one does rig control for the 2nd rig 
> and the other connects to a tnc for packet (yes, I live in the dark ages with 
> no high speed internet).
> 
> #3, I think there is an ini setting to choose which soundcard writelog uses.  
> Actually, the most recent versions of writelog have a utility that you use to 
> select which soundcard writelog uses for what functions (i.e. ssb tx, rtty 
> decode, recording audio).
> 
> Good luck.
> 
> 73 de Al, KE1FO
> 
> ----- Original Message -----
> From: Natan Huffman
> Sent: 8/19/2004 4:22:49 PM
> To: writelog@contesting.com
> Subject: [WriteLog] Install redux
> 
> > Dear Group,
> > 
> >  
> > 
> > I'm wondering if anyone can point me to a reference or offer some help.
> > Recently my 10 year old dedicated WL computer died (fatal HDD malfunction)
> > and I've been forced to purchase a new contemporary HP computer as a
> > replacement.  I run a SO2R setup using the W5XD Multikeyer 1100 and the dear
> > new computer has but one serial port.  I'm having several challenges:
> > 
> >  
> > 
> > 1/         I cannot get any version 10 to install even though I have a new
> > serial number.
> > 
> >  
> > 
> > 2/         Since I have but one physical serial port, I plan on using a
> > cable to convert a serial to USB connection.  Is this reasonable?
> > 
> >  
> > 
> > 3/         Went out and purchased a Creative Lab SoundBlaster audio card and
> > it installed and works fine.  I did this because the applet sbchk was not
> > too kind when it looked at the built in sound chips, so I purchased a real
> > sound card.  However, the new sound card gets the identical poor sbchk
> > result as if the sbchk is still looking at the old chip set.  Is this
> > possible?
> > 
> >  
> > 
> > The new P4 3.0 GHz. Computer is using Windows XP Home Edition.  Want to get
> > WL working for the season and all the new antennas.
> > 
> >  
> > 
> > 73
> > 
> >  
> > 
> > Natan W6XR
> > 
> >  
> > 
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> > 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>