My WriteLog ver 10.44-10.48 aren't playing with my DX Doubler to switch from
radio left to radio right and vice versa. I think the DXD is working okay
since it goes from radio 2 to radio 1 when I apply +5 vdc to the DXD pin 14.
In ports setup I've got DVK selected to LPT1...which I think is what's
needed to externally switch radios via pin 14 on the LPT. Can anyone give me
the correct pins to measure state/voltage on the LPT port to help
troubleshoot this problem (i.e. pin 14 and ??). What voltages should I see
if WriteLog is driving the pin high and low?
Thanks, de Rick I0/N6CY
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|