I see it.
I sent an old image - not the current one.
Sorry :-(
Attached is the one I intended to send that shows Com3 set for my radio.
> ------------Original Message------------
> From: "VE3XD" <ve3xd@rogers.com>
> To: "'Bob Naumann - N5NJ'" <n5nj@gte.net>, "'Jim Dunbar'"
> <jdunbar28@mchsi.com>, writelog@contesting.com
> Date: Sat, Jul-31-2004 6:36 AM
> Subject: RE: [WriteLog] Write Log Rig Control
>
> Bob,
>
> You must be using an older version of Writelog. The radio selection
> check
> boxes were eliminated several releases back and now only the buttons
> are
> used for both CW and rig selection. Otherwise it still works the same
> way.
> Jim has responded and his problem is solved.
>
> 73, Don VE3XD
>
> > -----Original Message-----
> > From: Bob Naumann - N5NJ [mailto:n5nj@gte.net]
> > Sent: Saturday, July 31, 2004 7:03 AM
> > To: VE3XD; 'Jim Dunbar'; writelog@contesting.com
> > Subject: RE: [WriteLog] Write Log Rig Control
> >
> > Jim,
> >
> > The column selection button is to only to select the CW port.
> >
> > To define the radio control, you have to select the proper
> > radio in the Com 4 row.
> >
> > In mine, I'm using Com 3 and I have attached an image of the
> > port set up window so you can see what it's supposed to look like.
> >
> > 73,
> >
> > Bob N5NJ
> >
> > > ------------Original Message------------
> > > From: "VE3XD" <ve3xd@rogers.com>
> > > To: "'Jim Dunbar'" <jdunbar28@mchsi.com>, writelog@contesting.com
> > > Date: Thu, Jul-29-2004 8:53 PM
> > > Subject: RE: [WriteLog] Write Log Rig Control
> > >
> > > Jim,
> > >
> > > You should be able to select both. Even though these are option
> > > buttons they act like check boxes. That is, they are not mutually
> > > exclusive. You don't really need an extra column but it
> > might be less
> > > confusing if the options were check boxes that are normally
> > used when
> > > more than one choice is possible. If you can't check both,
> > one for cw
> > > and one for rig control then something else is wrong.
> > >
> > > Don VE3XD
> > >
> > > > -----Original Message-----
> > > > From: writelog-bounces@contesting.com
> > > > [mailto:writelog-bounces@contesting.com] On Behalf Of Jim Dunbar
> > > > Sent: Thursday, July 29, 2004 9:47 PM
> > > > To: writelog@contesting.com
> > > > Subject: [WriteLog] Write Log Rig Control
> > > >
> > > > Hello,
> > > >
> > > >
> > > >
> > > > I have the latest Write Log and I am using Windows 2000
> > with my Dell
> > > > Latitude Laptop.
> > > >
> > > >
> > > >
> > > > I use LPT1 to generate CW and this works very well with QSK when
> > > > using Full-Break-In on my FT-1000D.
> > > >
> > > >
> > > >
> > > > I also have a USB to Serial converter box from MIcroham.
> > > >
> > > >
> > > >
> > > > This box allows me a virtual port COM 4. The output of this
> > > > converter box has a 6 pin din connector that connects to the
> > > > FT-1000D CAT jack for Rig control
> > > >
> > > >
> > > >
> > > > This virtual COM 4 port works very well also for controlling my
> > > > FT-1000D Rig frequencies with Writelog.
> > > >
> > > >
> > > >
> > > > HOWEVER, The problem is that I cannot select LPT 1 for CW
> > and COM 4
> > > > for Rig Control at the same time.
> > > >
> > > >
> > > >
> > > > There is only one COLUMN under the Ports Setup Page for selecting
>
> > > > COM 4 or LPT 1.
> > > >
> > > >
> > > >
> > > > I would like to see another column of entries, so that both LPT 1
>
> > > > for CW and COM 4 for RIG Control can be set at the same time.
> > > >
> > > >
> > > >
> > > > So, right now I can only select LPT 1 or COM 4 and not both.
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > >
> > > >
> > > > Jim
> > > >
> > > > K4PV
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > WriteLog mailing list
> > > > WriteLog@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/writelog
> > > > WriteLog on the web: http://www.writelog.com/
> > > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > > WriteLog on the web: http://www.writelog.com/
> > >
> >
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|