Several days ago, I wrote about my Rigblaster getting PTT turned on,
causing rig to go into xmit. A few folks had ideas, but nothing turned
up to fix the problem.
I asked the Rigblaster folks, and since the Rigblaster PTT *and* CW
lights get turned on by Writelog, he said that the DTR and RTS are being
turned on (HIGH) by the software.
Checking everything I could find in the Writelog help files, I found these
comments:
v10.18
Put PTT signal on RTS line if using "PC Generates" CW on COMM port.
v10.19
Add DisableCommPTT INI entry.
To prevent WriteLog from putting a PTT signal on RTS
[Configuration]
DisableCommPTT=YES
I verified that I do have DisableCommPTT=YES in the Config section of
Writelog.ini -- yet no matter what rig I have in Setup/Ports, no matter
what other settings I've tried -- if I have ANY rig shown on COM1, it
throws the Rigblaster (and thus the rig) into PTT / CW --- apparently
because RTR and DTR are HIGH.
Am I missing something? This seems like a Writelog software issue.
(computer: 1.5 yr old Dell 2.2GHz, WinXP HE)
Any advice, or any other thing to try -- I'm all ears.
Thanks & 73,
Dave NØRQ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|