WriteLog
[Top] [All Lists]

RE: [WriteLog] Two sound cards

To: "'Ric Plummer'" <ricp@alum.wpi.edu>,"Writelog" <writelog@contesting.com>
Subject: RE: [WriteLog] Two sound cards
From: "Don Melcher" <don@hfradio.com>
Date: Sat, 8 May 2004 17:44:15 -0700
List-post: <mailto:writelog@contesting.com>
OK - well - things are odd - v10.46 - if I go into the .ini and under
configuration and set soundboardindex=1 then I get the selection. But if
I open the Writelog Mixer the selections are as other report - but then
that line in the .ini goes away and everything goes downhill from there.
More to follow. It has something to do with Skype - which along with
Xppro remote desktop allows me to access the station over the net.

-----Original Message-----
From: Ric Plummer [mailto:ricp@charter.net] 
Sent: Saturday, May 08, 2004 4:46 PM
To: Don Melcher
Subject: Re: [WriteLog] Two sound cards


At least in the lastest version 10.47E ( it did change in the last 10 or
so version some time ) each of four sound card functions has a drop down
menu to select from if you system has more than one recognized sound
card. The four are:
    Audio In
    Audio Out
    Mixer
    Audio Review

Ric KV1W

----- Original Message -----
From: "Don Melcher" <don@hfradio.com>
To: "'Alfred J. Frugoli (KE1FO)'" <frugoli@worldlinkisp.com>; "Writelog"
<writelog@contesting.com>
Sent: Saturday, May 08, 2004 16:19
Subject: RE: [WriteLog] Two sound cards


> Hmmmm - I don't see a selection option there... Only a selection of 
> which input to use of receive. Seems to me I have seen it in the past 
> - but this is with XPpro - the selection IS present on a W2K machine. 
> The problem is that I am trying to run Writelog at the same time as 
> Skype (voice over ip) and they BOTH want to use the default sound 
> device (there is a selection in Skype but it doesn't work!).
>
> I remember there was a line you put into the writelog.ini file - but 
> maybe that doesn't work any more - or at least it doesn't under XP.
>
> -----Original Message-----
> From: Alfred J. Frugoli (KE1FO) [mailto:frugoli@worldlinkisp.com]
> Sent: Saturday, May 08, 2004 8:00 AM
> To: Don Melcher
> Subject: Re: [WriteLog] Two sound cards
>
>
> Open the WriteLog Sound Board Mixer control and select the card you 
> want to use for each function there.  Once you make the change you'll 
> need to restart writelog for it to taek effect.
>
> Good luck.
>
> 73 de Al, KE1FO
>
> ----- Original Message -----
> From: Don Melcher
> Sent: 5/8/2004 2:01:03 AM
> To: writelog@contesting.com
> Subject: [WriteLog] Two sound cards
>
> > Can someone please remind me how I tell WriteLog which of the two 
> > soundcards in my PC to use? I know it has been on here before - but 
> > for the life of me I can't find it and I am VERY tired of banging my

> > head against the desk.
> >
> > System has onboard Realtek AC97 and PCI Turtle Beach Santa Cruz.
> >
> > Don
> > W6ZO
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com 
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com 
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>