Here's the update, after s'more playing around.
Device ID: -1 is the original soundcard - currently connected to rig 1.
Device ID: 0 is ALSO the original soundcard - currently connected to rig 1.
Device ID: 1 "loads" but shows Lost Audio
Device ID: 2 Error - Can't open Sound card (2)
Device ID: 3 Error - Can't open Sound card (3)
It would seem that Windows is confused!
73 de Al, KE1FO - off to pull another sound card out of another machine and see
if that will work.
----- Original Message -----
From: John Fleming
Sent: 4/14/2004 6:44:45 PM
To: frugoli@worldlinkisp.com;writelog@contesting.com
Subject: Re: RE: [WriteLog] 2 identical soundcards
> MMTTY Instance 1:
> Device ID: -1
> Gets audio from rig 1 and copies signals fine.
>
> MMTTY Instance 2:
> Device ID: 1
> Shows "lost audio"
> If I change the DeviceID this instance of MMTTY I get a "can't open sound
> source" or whatever the error is.
>
> So, it seems that MMTTY Instance 2 is seeing the 2nd soundcard but somehow
> the audio isin't getting to MMTTY.
>
> +++++++++++++++++++
>
> Have you tried other device numbers, e.g. 0 and 1? -1 means the first one
> it finds, and 1 denotes a specific one. I think the error is that the
> soundcard is in use rather than audio not getting to the rig.
>
> Try device 0 and figure out which card that is by inputing audio to each
> card one at a time. Then do the same with device 1 - If device 1 is not
> your second card, then try device 2 etc until you find it.
>
> Then let us know hwat happened! GL - John, WA9ALS
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|