(-1) for the device in MMTTY is the system default.
(0), (1), . . . . are assigned to specific cards irrespective of
which is the system default.
When you assigned (-1) and (0), you like picked the same card and
after its handle was assigned, you attempted to reassign it and
got an error message.
Bob
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Kurszewski
Chad-WCK005
Sent: Friday, February 27, 2004 4:51 PM
To: WriteLog Reflector
Subject: RE: [WriteLog] Problems with two sound cards and MMTTY plug-in
A couple of us are having similar problems but do not have solutions.
When you try to open the 2nd RTTY window (rttyrite with MMTTY),
does the RTTYrite window stay open, or does it complain about
rttyrite with a windows pop-up message? My 2nd MMTTY window
opens, but can't get a second RTTYrite window open without it
crashing.
Jim/W7EJ, have you fixed your problem yet? If so, what was the fix?
Chad WE9V
> -----Original Message-----
> While setting up for the NAQP RTTY contest, I have found that
> WriteLog with
> the MMTTY plug-in now won't open the second sound card.
>
> It has worked in the past and I can open two windows of MMTTY
> and each will
> operate with it's assigned sound card.
>
> With my system, the original sound card is device (-1) in
> MMTTY and the
> second sound card is device (0). WriteLog gives me an error
> that it cannot
> open Soundcard (0).
>
> Any suggestions on what to look for?
>
> Thanks
>
> Chuck, KE4OAR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|