I believe that the rig button has been eliminated
It really was extra anyway.
If you have a rig type chosen for that COM port then it is a rig interface.
CW on the other hand, you have to chose which one, especially if you have
more that one port
in use, such as with two rigs.
So, no lost function, just removal of extra "stuff"
Ric KV1W
----- Original Message -----
From: "David Shipman" <davidshipman@shaw.ca>
To: <WriteLog@contesting.com>
Sent: Friday, February 13, 2004 01:39
Subject: [WriteLog] !0.45m Problem with Rig Control
> Folks
>
> I have tried 10.45M on both a WIN98 and XP Pro machine. Neither will
> display the RIG column in the "Port Setup - What is connected?" Menu.
> The hardware is ok as my general logging program, Logic, displays
> frequency for both the rigs I have connected.
>
> Any ideas or help would be appreciated.
>
> Thanks - Dave
>
> David Shipman (VE7CFD/VA7AM)
> davidshipman@shaw.ca
> Phone: 604-926-8170
> Fax: 604-926-7320
> http://www.bcdxc.org
>
> All outgoing mail scanned by Norton Anti Virus
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|