WriteLog
[Top] [All Lists]

Re: [WriteLog] Packet wtih Writelog

To: Aldewey@aol.com, writelog@contesting.com
Subject: Re: [WriteLog] Packet wtih Writelog
From: Pat Cain KØPC <k0pc@arrl.net>
Date: Mon, 26 Jan 2004 13:57:54 -0600
List-post: <mailto:writelog@contesting.com>
Al,
There are a couple of places in the writelog.ini file that set up the packet connection to a TNC.


The [Ports] section sets the communication port speed, etc.

[Ports]
COM1:=9600,e,7,1,x
COM2:=9600,e,7,1,x
COM4:=9600,e,7,1,x
COM5:=9600,e,7,1,x
COM6:=9600,e,7,1,x


The [Packet] section sets which port is used for the TNC.


[PACKET]
PORT=6

Check to make sure these are set and match the settings on your TNC.

73,
Pat  KØPC


At 09:38 PM 1/24/2004 -0500, Aldewey@aol.com wrote:
Newbie Question.

Is there some trick to getting packet via a TNC to work with Writelog?

My configuration is Windows 98 wtih COM1 connected to Radio and COM2
connected to TNC. This configuration works fine with NA and TR. Also, I am able to
talk to the TNC via COM2 using Hyperterminal under Windows.


However, when I select the packet window in Writelog and select COM2 nothing
happens.  It is not clear to me if I need to do anything with the PORTS
setting.  It looks like all you can select is Rig Control or CW control there.

What am I missing?

73,

AL, K0AD

_______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web: http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>