WriteLog
[Top] [All Lists]

Re: [WriteLog] RTTY Questions

To: "Bob Naumann - N5NJ" <n5nj@gte.net>, <writelog@contesting.com>
Subject: Re: [WriteLog] RTTY Questions
From: "WA9ALS - John" <ham_reflectors@wa9als.com>
Date: Sun, 25 Jan 2004 11:09:01 -0500
List-post: <mailto:writelog@contesting.com>
> I started rttyrite, and set the port for com4.  This is the problem.  This
does not make rttyrite do ptt on Com4.  What I had to do, is leave the
settings for LPT1 alone, and add that Com4 is a CW port in my Writelog port
setup, and contrary to my logic, have no port selected in Rttyrite.

This has to be a Rigblaster issue.  I use COM2 for FSK and PTT, and COM2 is
set in the Rttyrite window.  If I chose "None" in the Rttyrite window, my
rig is not keyed, as expected.  My Ports Setup only has settings enabled for
rig control (freq/band/QSY).

I don't understand how you get rig keying without selecting a com port in
the Rttyrite window - unless you are doing that via rig control by
indicating so in the Port-Setup screen.  - John


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>