WriteLog
[Top] [All Lists]

Re: [WriteLog] NO CW

To: "Ed" <edw3nr@nexband.com>, "Writelog" <writelog@contesting.com>
Subject: Re: [WriteLog] NO CW
From: "Frank Grossman (WB2BXO)" <flgrossman@earthlink.net>
Date: Fri, 28 Nov 2003 16:59:51 -0500
List-post: <mailto:writelog@contesting.com>
Ed, make sure both the radio and WriteLog are in the CW mode, if you haven't
done so already.  Also, remember that WL does not generate a sidetone, so
make sure that you're in a configuration that lets you hear the rig's side
tone.  I do testing on my 765 by going into CW mode, then turning the VOX so
the radio generates a sidetone without actually keying the xmitter.  Another
thing to do is try keying the rig with other software you have, like DX4WIN.
If that works, but WL doesn't, you have a keying interface problem... 73 and
GL in the Test... Frank WB2BXO

----- Original Message -----
From: Ed <edw3nr@nexband.com>
To: Writelog <writelog@contesting.com>
Sent: Friday, November 28, 2003 4:48 PM
Subject: [WriteLog] NO CW


> OK, I'm lost. I get no CW output from WL. I have tried every setting that
I
> could. Still no joy. CW is on the DTR line and PTT is on the RTS (for
FSK).
> Rig is an Icom 761 using just the TXD/RXD for QRG and mode.  What's the
> secret ??? Any ideas.....
>
> Ed W3NR
>
> BTW CW works just fine from other programs and yes dlportio is
running....I
> use Win2k. or does for whatever reason, dlpotio need to be in the WL
> directory
>
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/2003
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>