On Tue, 19 Aug 2003 08:27:26 -0700, Bill Turner wrote:
>On Mon, 18 Aug 2003 16:06:31 -0500, "Larry Alkoff"
><labradley@mindspring.com> wrote:
>
>>I'm using a KAM Plus but it's quite hard to tune in rtty by watching the
>>lights.
>>
>>Larry N2LA
>
>_________________________________________________________
>
>There is a simple modification you can do to the KAM to provide X and
>Y outputs to drive a scope. The KAM already has the drive available
>internally, all you have to do is add the connections to the
>connector. Any scope with X-Y inputs will do; nothing fancy needed.
>The simplest, cheapest scope you can find should be fine and will be
>FAR superior to watching those LED's.
>
>Email me if you need directions.
>
>--
>73, Bill W7TI
I'd very much like the directions or at least the location of the header
or wherever the output is available on the board.
Thanks,
Larry
Larry Alkoff N2LA - Austin TX
|