Hello !
I also had some problems with my interface !
Not the original one for YAESU but working fine with CT or WL on a "normal"
PC.
Just no chance to use this with my SATELLITE PRO from Toshiba !
Writelog-Version is the latest one !
Regards de Jochen
----- Original Message -----
From: "Jim Galm" <w8wts@hotmail.com>
To: <writelog@contesting.com>
Sent: Friday, July 18, 2003 7:03 PM
Subject: [WriteLog] Comm port PTT not working on WL 10.40J and later.
> I am stuck on a problem with the newer versions of WL, and would greatly
> appreciate some help.
>
> Using a notebook computer, I use COM1 for PTT on RTS and CW on DTR with
> appropriate interfaces. I believe the interfaces work, as all ham
programs
> (such as Digipan) as well as WL 10.36G and all prior WL versions work
> perfectly.
>
> WL versions 10.41B and 10.40J will not operate PTT on COM1 RTS in sound
> board DVK or sound board RTTY modes. COM1 is set for CW, and All mode PTT
> on CW port RTS is checked. When WL launches, it will unassert PTT on COM1
> RTS. However, it never actuates the signal during DVK or RTTY operation.
>
> This behavior has been verified on three separate computers, and two OSs
> (Win2kPro and WinME).
>
> Thanks in advance for your guidance and experiences with this problem.
>
> 73,
>
> Jim Galm, W8WTS
> W8WTS@hotmail.com
>
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*
> http://join.msn.com/?page=features/virus
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|