[WriteLog] Re: [Icom] ICOM 725

[w7sac@neo.rr.com (David S McCallum)]

Jim, if you getting full power out in cw put the rig in ssb mode trying
talking into the mic and wiggle your mic cord around  especially where
the cord coils arond, at both ends, good luck. Might even take the mic
apart and make sure a wire hasn't broken some place inside, 73, Mac

David S. McCallum/USAF Retired/ Chief Mac/w7sac/4
----
Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/