Change the Rig CI-V address to 48H, this is what the WL software expects for
IC-706. If you want, you can change writelog instead by adding the icom
entry in the ini file (see the help files).
I use the 19200 setting in my rig/computer but that's just because I'm young
and want the fastest hihi
73,
Zev N2WKS
-----Original Message-----
From: Fred Hyde [mailto:olelena@tds.net]
Sent: Wednesday, April 09, 2003 10:51 PM
To: writelog@contesting.com
Subject: [WriteLog] New user questions
Hello,
I'm a new user of writelog and I have a couple of "newbie"-type questions.
I'm using Writelog on a Win 2000 platform (therefore no LPT support w/o
using a 3rd party patch) along with an IC-706MkIIG and I'm trying to get the
rig control function up and running.
In the setup window, under set up ports, I have the COM 1-rig checked, baud
rate set up as 9600 (same as setting on the 706MkIIG), Poll checked, Comm
PTT = "yes", All Mode PTT on CW Port RTS checked, Windows sound board
checked for DVK interface. I'm using a K1NU cable and think that the issue
I'm dealing with, since I cannot get the rig to change frequencies when I
double-click on a packet spot that is fed into the laptop by telnet.
The control cable runs from the 9-pin serial port to the 3.5 mm data jack on
the 706.
On the 706, the CI-V settings are 731-off, CI-V address 58H, CI-V 9600 baud
(matches software setting), CI-V trn "on".
I also note that in the tech support files the radio address I need to think
about for Icom does not match anything that's on the radio menu itself.
So the questions are:
(1) Are the settings I have for Writelog correct?
(2) What are the best radio settings?
(3) Any other things I need to worry about, such as a LPT connection using
3rd party software to get Win 2000 to work?
(4) More of a comment: I checked the archives and I don't see anything that
would be of help.
Many thanks in advance -
Fred K9FWH
Madison, WI
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
CONFIDENTIALITY NOTICE: This communication and any attachments are
confidential, and are only for the use of the intended recipient. If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited. If you have received this
communication in error, please contact the sender immediately and
delete the original message. Thank you.
|