I have finally sorted the problem of the "latch" facility apparently not
working when operating SSB with the W5XD/K5DJ keyer. This was very much by
trial-and-error as the information is not included in any of the on-line
"help" files.
1 - Open "Port Setup" window
2 - Click on CW PTT button (bottom right-hand of screen)
3 - Tick button marked "On LPT pin 16/COMM RTS".
4 - Be sure to SAVE THE CONFIGURATION.
----- Original Message -----
From: "GW4BLE" <GW4BLE@btinternet.com>
To: <writelog@contesting.com>
Cc: "Ron K5DJ" <k5dj@austin.rr.com>; "W. Wright, W5XD" <w5xd@writelog.com>
Sent: 06 April 2003 10:30
Subject: [WriteLog] SO2R & W5XD/K5DJ KEYER
> Hello,
>
> I would be interested to hear from anyone who has used the "latch"
facility
> on SSB when using the W5XD/K5DJ keyer under SO2R operation, as it would
> appear to *not* work; why this is exactly is not clear.
>
> It works fine on CW, but *not* on sideband.
>
> Please post your findings to the reflector.
>
>
>
> 73
>
> Steve
> GW4BLE
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|