Hi Wayne,
saving the configuration is another thing than saving the contest
file!
It is the last item of the Setup menu. Try this and you will find your
port setup after the next start of WriteLog again.
My experience is that CW through the COM-port works fine under
Win2000/WinXP. But you can try CW via LPT again after entering the
following line in the writelog.ini in the [ports] chapter:
CW_ON_PIN1=1
73 + 55
Wolf, DL6JZ
Wayne Bailey wrote:
> I upgraded my computer to a new Hewlett Packard 753N P4
> 2.5GHZ with 1024
> Meg Ram. Running WINXP Home Edition.
>
> I am trying to use LPT Keying and now the CW Stuttering
> problem is worse
> that I experienced under WIN 98. I thought WINXP HE is a
> true
> multitasking program?????? Obviously not. Other users
> on the reflector
> have said Writelog under WINXP HE works flawlessly with
> LPT Keying. Is
> the W5XD Multi Keyer the only fix????? I have ordered a
> serial cable
> interface from K1NU and maybe that will fix the problem.
>
> Also I installed a Byterunner 4 Port Card and have done
> the necessary
> setup. He Byterunner uses Comm 4, 5, 6, 7. I did the
> necessary Com1=1,
> comm. 2=4 etc. No problems there.
>
> In my Writelog.ini file MY FT-1000MP is, however when I
> enter the
> contest after doing the proper Setup of Ports. I save
> the file and
> later exit. When I re-enter the contest I have to go
> back to Port Setup
> and re-select to get the program to read my FT-1000MP
> again??? Any
> ideas. It appears the port setup is not being saved and
> writing to the
> Writelog.ini file. Am I off base???
>
> Help!!!!!!!!!!!!!
>
> Any assistance will be greatly appreciated.
>
> 73 de Wayne, NX7K
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|