I assume your doing AFSK
How are you doing PTT??
Via rig control?
or via The com port that goes to your rigblaster and is also specified
in the rttyrite window port tab for the MMTTY plugin??
(you specify it in the Rttyrite window)
Only in the latter case will the Rigblaster know that your are in Digital
mode and route the actual audio from the soundcard to the rig.
GL CU in the test
Steve N1NB
>Subject: [WriteLog] USING MMTTY
>
>
>I have WL running with the MMTTY plug-in and everything looks good. I =
>have used MMTTY stand alone and it works fine. When using it with WL I =
>press the F2 key and my rig goes to TX and the message shows on Rttyrite =
>but nothing is sent. I am using a Rigblaster Plus and watching it I see =
>it does not do into the TX (DIGITAL) mode. I found out that for CW I =
>had to put a cord from the Rigblaster CW to the rig KEY jack. What am I =
>missing here for RTTY? I could use MMTTY stand alone this weekend but =
>would like to learn WL if it kills me.
>
>Dennis AB8NI------------------------------
>
>_______________________________________________
|