I downloaded and installed DirectIO and it allows my P38 to work in
everything but Rttyrite. It works just fine in XPWare etc.
Don't know why rttyrite won't connect with DirectIO and everything else
will.
Denis
AA0YX
----- Original Message -----
From: "Wayne Wright, W5XD" <w5xd@writelog.com>
To: <aa0yx1@attbi.com>
Cc: <writelog@contesting.com>
Sent: Monday, December 23, 2002 20:23
Subject: Re: [WriteLog] Rttyrite and P38
> > I've just installed Windows XP and I'm trying to get my HAL P38
> > running without success. I've put P38_PORT=OX360 into the
> > writelog.ini file in the rttyrite section and still no joy. Anybody
> > have any ideas. I'm using Writelog 10.37.
> >
> > Denis
> > AA0YX
> >
>
> The P-38 is not supported by WriteLog on Windows XP.
> However, you might be able to make it work. I haven't
> tried this, but if you look at the instructions here:
>
> http://www.writelog.com/support/lpt_port_support_on_windows_nt.htm
>
> You might be able to translate the directions to
> add the P-38 port addresses to the list allowed by
> UserPort.
>
> Off the top of my head, I don't remember exactly how many
> port addresses the P-38 uses, but it won't cause any extra
> damage to "open up" a wider range that it actually uses.
> You might try 0x350 through 0x370 to start.
>
> Wayne
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|