Since you want the keyer to generate PTT when you operate the
paddles, you need to do this:
1. In the CW PTT setup window you need to select
the "on LPT pin 16" setting
2. Set the PTT delay to anything but zero. set it to 1 msec
is enough. If you leave it at zero, the keyer doesn't do what
you asked. (I am looking at this. Obviously, you might want
zero delay and PTT, but right now it won't let you do that.)
Wayne
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Bill Leahy, K0MP
> Sent: Saturday, December 07, 2002 02:35
> To: writelog@contesting.com
> Subject: [WriteLog] Paddle PTT
>
>
> In setting up Writelog, I have not been able to have the PTT
> work with a paddle plugged into the W5XD Multi-Keyer. PTT is
> provided to the rig over a serial port. PTT works well with
> the foot switch and CW function keys (No VOX). The paddle
> will work with the VOX tuned on, however it is in a QSK mode,
> which I don't want to operate in. The interfaced rig is an
> FT-1000MP. The .ini command CWPTTIDLE seems to have no effect
> regardless of the number applied. Is there something I'm
> missing in the .ini file?
> 73,
> Bill, K0MP
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|