> 1. I have CommPTT (rig control PTT) set to "NO".
> 2. I have the radio button checked for CW on COM 2.
> 3. I have the "All Mode PTT on CW port RTS -NOT- checked
> 4. In the CW PTT window dialog that you get from hitting the CW PTT
button,
> I have the "NONE" radio button checked.
>
> I use one COM port (1) for CW keying only (DTR) and another com port (2)
for
> FSK/PTT. In the Rttyrite window menu, I have COM 1 selected. Whether I
use
> Rttyrite or not, I get PTT control from COM 1. Thus I get RTS PTT control
> separate from rig control.
Drat, I didn't say that correctly in the second paragraph above! CW keying
is on COM 2 and PTT is on COM 1.
|