[WriteLog] ptt line resistance?

[hamcat@directvinternet.com (K4SB)]

No, I didn't write that
> 
> > > Be certain the Transistor is a PNP if Positive
> > > keying.
> > > Be certain the correct polarity is used from the
> > > RTS.

This what I wrote, and I see 2 typos.
 
> Probably just a typpo on the "PNP", but you cannot use RTS on a NPN
> circuit. RTS is normally about -12 v at idle 

Should have been "cannot use RTS on a PNP"

):<
Ed