If you are running NT, WIN2000, WINXP , or any of the 32 bit variants then
WriteLog is not capable of producing CW from the LPT port. The OS does not
allow direct accesses and WriteLog does not contain a driver to provide it.
OTOH DX4WIN does (if it works it MUST) have a driver so it can access the
port.
Your only choice is to find a third party driver or to add COM ports. It is
easier and cheaper to add ports.
One day perhaps WriteLog will make use of the free third party driver that
is used by some other programs and will support it.
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Eric Lowell
> Sent: Tuesday, October 29, 2002 4:08 PM
> To: Writelog
> Subject: [WriteLog] No CW from LPT1
>
>
> Hi all,
>
> I'm running ver 10.34B in Win98se. CW keyboard is not sending, LPT1 is
> checked in setup ports, as is PC Generates. BIOS LPT1 port # matches the
> Writelog.INI #.
>
> The same hardware works fine with DX4WIN.
>
> Any thoughts on what to try next?
>
> Best Regards, Eric (W1EL)
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|