It's probably the rig address. You can change WL in the ini file, or you
can change the rig via menu to what WL expects.
Also: " The following entries override WriteLog's default setting for the
Icom rig address for the various Icom rigs. All rigs that have Icom rig
addresses have corresponding entries in WriteLog.ini here under the name
that matches the name in the Setup Ports dialog including space characters!
Icom IC-781=0x33
Icom IC-756PRO=0x12
Icom rig addresses at: http://www.qsl.net/wa9als/ICOM_HEX_ADDRESSES:
IC-756PROII 64
IC-756PRO 5C
IC-756 50
----- Original Message -----
From: "Richard L. King" <k5na@texas.net>
To: <writelog@contesting.com>
Sent: Friday, October 25, 2002 3:18 PM
Subject: [WriteLog] 756Pro Communication
>
> Hello Group:
>
> I'm here at K5NA's place with my 756pro. I can't get the rig to
> communicate with the pc. It worked fine at my station. What are the
setup
> perameters in WL to work with the 756pro. I currently have it setup on
com
> 1 auto baud rate polling is checked. I'm using a K1NU cable between the
> rig and pc.
>
> Any help would be appreciated.
>
> k5na@texas.net
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|