I removed the usb serial ports as a test, removed the drivers, am left with
just com1. If I have rig interface com1, rig interface works fine. If I
select cw also com1, pc generates, the rig interface stops functioning. Is
there some flow control that changes when pc-generated cw is enabled? Some
lines I must tie one way or the other that maybe just happened to work
without cw output? Of course I'm trying this the night before the pa qso
party...
Anybody using ICOM and pc generated cw?
Thanks,
-Steve, AA3ZV
----- Original Message -----
From: "Randy Thompson, K5ZD" <k5zd@charter.net>
To: "Steve Russell" <steve@slrs.com>; <writelog@contesting.com>
Sent: Friday, October 11, 2002 6:58 PM
Subject: RE: [WriteLog] CW Keyer - PC generates
> But is DXBase sending CW?
>
> Make sure that COM1 and COM3 are not sharing interrupts.
>
> Randy, K5ZD
>
> > -----Original Message-----
> > From: writelog-admin@contesting.com
> > [mailto:writelog-admin@contesting.com]On Behalf Of Steve Russell
> > Sent: Friday, October 11, 2002 21:44 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] CW Keyer - PC generates
> >
> >
> > As soon as I select 'PC generates' for my CW generation, the
> > interface to my rig dies.
> >
> > I'm using COM3 as rig interface, COM1 as CW (DTR) interface. Rig
> > is IC-746pro (using 756pro selection).
> >
> > DXBase survives this setup, so I don't think it is a com port problem.
> >
> > Any ideas?
> >
> > Thanks!
> >
> > -Steve
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> > text/plain (text body -- kept)
> > text/html
> > ---
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|