Based upon ALL of the messages in this thread... Have any of you who
have had this problem, opened a different log using similar parameters
to see if it is unique to the CQP module or if it really is a
Writelog-wide issue? This could very easily be related to the module
programming itself not interacting with Writelog correctly. Definitely
having cabrillo greyed-out is a problem with the module itself.
-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com] On Behalf Of K4SB
Sent: Tuesday, October 08, 2002 9:56 AM
To: writelog@contesting.com
Subject: Re: [WriteLog] Callsign Edit Problems in 10.35E/F
> From: "Eric Raub" <ki0mi@earthlink.net>
> Subject: [WriteLog] Callsign Edit Problems in 10.35E/F
> > I added the 10.35F patches prior to CQP, but I'm still showing only
> 10.35E.
> > During CQP I had problems editing the callsign in the log window.
> > Soon as I had made the callsign correction and hit enter, WriteLog
> > had
> an illegal operation error with this message:
> >
> > WRITEL32 caused an invalid page fault in
> > module WRITEL32.EXE at 0137:00418854.
Well, it is not exactly high tech, but my solution for this is to make a
note of the qso number and correct call sign, get on with the program
with the error still in place, and later just edit the Cabrillo file to
correct.
Lots faster than having to go through a reboot, and possible loss of
data
73
Ed, K4SB
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|